Aquasana AQ-RO3-RO Membrane Replacement Cartridge to suit Aquasana OptimH2O Reverse Osmosis Water Filter
The reverse osmosis membrane is the second stage of your Aquasana OptimH2O Reverse Osmosis + Claryum system, and it does the work that carbon filtration alone cannot. Water is pushed through an extremely fine membrane that holds back dissolved contaminants, leaving cleaner water for drinking and cooking.
Over time the membrane naturally wears down and your system's performance drops off. Aquasana recommends replacing it every 12 months, and using only genuine Aquasana replacement filters to keep your system performing as designed.
What It Reduces
The Aquasana OptimH2O Reverse Osmosis + Claryum system has been tested and certified by WQA to NSF/ANSI Standards 42, 53, 58 and 401 for the reductions listed in the table below.
| Contaminant | Standard | Reduction |
|---|---|---|
| Chlorine and chloramine | NSF/ANSI 42 | 97.66% |
| Lead (pH 6.5) | NSF/ANSI 53 | >99.4% |
| Mercury (pH 6.5) | NSF/ANSI 53 | >96.5% |
| PFOA and PFOS | NSF/ANSI 53 | 96% |
| Cysts | NSF/ANSI 53 | >99.99% |
| Asbestos | NSF/ANSI 53 | >99% |
| Arsenic (pentavalent) | NSF/ANSI 58 | 97.6% |
| Fluoride | NSF/ANSI 58 | 95.7% |
| Copper | NSF/ANSI 58 | 96.6% |
| Barium | NSF/ANSI 58 | 95.2% |
| Cadmium | NSF/ANSI 58 | 95.3% |
| Chromium (hexavalent) | NSF/ANSI 58 | 97.0% |
| Selenium | NSF/ANSI 58 | 97.9% |
| Nitrate and nitrite | NSF/ANSI 58 | 82.4% |
| Radium 226/228 | NSF/ANSI 58 | 80.00% |
| Total dissolved solids (TDS) | NSF/ANSI 58 | 95.0% |
| Microplastics | NSF/ANSI 401 | 99.1% |
| Ibuprofen | NSF/ANSI 401 | 95.3% |
| Naproxen | NSF/ANSI 401 | 96.3% |
| Bisphenol A (BPA) | NSF/ANSI 401 | 98.8% |
The system is also tested for a wide range of pesticides and volatile organic compounds. Download the full Performance Data Sheet for every contaminant tested. Not all contaminants listed may be present in your water, and this system does not remove all contaminants that may be present in tap water. Testing was performed under standard laboratory conditions, so actual performance may vary.
Compatibility
This membrane replaces the Stage 2 reverse osmosis membrane in the Aquasana OptimH2O Reverse Osmosis + Claryum under-sink water filter (AQ-RO-3). It is the replacement for membrane models AQ-RO3-RO, AQ-RO3-R and AQ-RO3-RM.
Installation
Read your system's owner's manual before you start. Replacing the membrane takes nine steps:
- Shut off the cold water valve under the sink. Release the pressure by turning on the dedicated faucet, and wait until water stops flowing.
- Unbox the new membrane, remove the plastic, then take the protection cap off the top.
- Disconnect the red ¼" hose from the drain port on the membrane elbow by pushing down on the white collar while pulling the hose out. Remove and discard the old flow restrictor.
- Remove the old membrane from the system manifold by rotating it to the left, then pull it down to detach. Discard it.
- Line up the connection points and attach the new membrane to the bottom of the manifold. Push it up while turning to the right, and check that it is locked in place and not sitting at an angle. Incorrect placement can damage the o-ring or cause leaks.
- Insert the new flow restrictor into the red ¼" tubing, then push the tubing into the drain port elbow on the membrane. Make sure the tube and elbow are fully inserted.
- Slowly turn the water valve back on. Turn on the faucet and flush the system for 24 hours. Do not drink the flushed water.
- Turn the faucet off and allow 2 hours for pressure to build. Check for leaks during this time.
- Once pressure has built up, your system is ready to use.
Do not use this system with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Specifications
- Model: AQ-RO3-RO
- Brand: Aquasana
- Filter stage: Stage 2, reverse osmosis membrane
- Recommended replacement: every 12 months
- Operating pressure: 275 to 689 kPa (40 to 100 psi)
- Operating temperature: 4.4 to 32.2°C (40 to 90°F), cold water only
- Daily production rate: 50.4 litres (13.32 gallons)
- Recovery rating: 29.43%
- Efficiency rating: 17.91%
Fully Disposable Cartridges
Simply wrap your worn-out cartridges up in old newspaper and place them into your rubbish bin.
Automatic Cartridge Replacement Service
When you invest in a water filtration product from My Water Filter®, we like to ensure you have the best experience possible. We like to lend a hand and take care of you as best we can.
- We happily monitor the cartridge life for you
- When the cartridge is due for renewal, we then contact you
- Once confirmed, we arrange everything and have a new replacement cartridge delivered to your door
The My Water Filter® Difference
"We love our products and what we do so below are just some of the things we do to make a difference"
Transform Lives Through Clean Water Access
At My Water Filter, our steadfast commitment goes beyond our customers and their families; we are dedicated to enhancing lives on a broader scale.
The core of our mission lies in leaving a legacy and making a meaningful difference in the world. With every purchase you make, we contribute 30 days' access to Life Saving Clean Water to those in need, acting as a catalyst for positive change.
We give water on your behalf through our enduring partnership with the Global Giving Initiative, Buy1GIVE1.
Your choice to support My Water Filter translates into tangible assistance for those in need, contributing to the collective effort of saving lives. Thank you for being a crucial part of this journey and for enabling us to make a genuine impact, one purchase at a time.

We Give Together
When you buy a water filter or home water solution from My Water Filter®, at no extra cost to you, we give life changing drinking water to people in need on your behalf.
Bit by bit we make a difference together. Check out our giving page here.
"We also deliver our products for FREE and you get a 30-day money back guarantee. The product comes with free insurance too!"
Free Delivery Australia Wide
Our 10 Guarantees
30 Day Money Back Guarantee
| Product ID | 2889 |
Aquasana AQ-RO3-RO Membrane Replacement Cartridge to suit Aquasana OptimH2O Reverse Osmosis Water Filter
The reverse osmosis membrane is the second stage of your Aquasana OptimH2O Reverse Osmosis + Claryum system, and it does the work that carbon filtration alone cannot. Water is pushed through an extremely fine membrane that holds back dissolved contaminants, leaving cleaner water for drinking and cooking.
Over time the membrane naturally wears down and your system's performance drops off. Aquasana recommends replacing it every 12 months, and using only genuine Aquasana replacement filters to keep your system performing as designed.
What It Reduces
The Aquasana OptimH2O Reverse Osmosis + Claryum system has been tested and certified by WQA to NSF/ANSI Standards 42, 53, 58 and 401 for the reductions listed in the table below.
| Contaminant | Standard | Reduction |
|---|---|---|
| Chlorine and chloramine | NSF/ANSI 42 | 97.66% |
| Lead (pH 6.5) | NSF/ANSI 53 | >99.4% |
| Mercury (pH 6.5) | NSF/ANSI 53 | >96.5% |
| PFOA and PFOS | NSF/ANSI 53 | 96% |
| Cysts | NSF/ANSI 53 | >99.99% |
| Asbestos | NSF/ANSI 53 | >99% |
| Arsenic (pentavalent) | NSF/ANSI 58 | 97.6% |
| Fluoride | NSF/ANSI 58 | 95.7% |
| Copper | NSF/ANSI 58 | 96.6% |
| Barium | NSF/ANSI 58 | 95.2% |
| Cadmium | NSF/ANSI 58 | 95.3% |
| Chromium (hexavalent) | NSF/ANSI 58 | 97.0% |
| Selenium | NSF/ANSI 58 | 97.9% |
| Nitrate and nitrite | NSF/ANSI 58 | 82.4% |
| Radium 226/228 | NSF/ANSI 58 | 80.00% |
| Total dissolved solids (TDS) | NSF/ANSI 58 | 95.0% |
| Microplastics | NSF/ANSI 401 | 99.1% |
| Ibuprofen | NSF/ANSI 401 | 95.3% |
| Naproxen | NSF/ANSI 401 | 96.3% |
| Bisphenol A (BPA) | NSF/ANSI 401 | 98.8% |
The system is also tested for a wide range of pesticides and volatile organic compounds. Download the full Performance Data Sheet for every contaminant tested. Not all contaminants listed may be present in your water, and this system does not remove all contaminants that may be present in tap water. Testing was performed under standard laboratory conditions, so actual performance may vary.
Compatibility
This membrane replaces the Stage 2 reverse osmosis membrane in the Aquasana OptimH2O Reverse Osmosis + Claryum under-sink water filter (AQ-RO-3). It is the replacement for membrane models AQ-RO3-RO, AQ-RO3-R and AQ-RO3-RM.
Installation
Read your system's owner's manual before you start. Replacing the membrane takes nine steps:
- Shut off the cold water valve under the sink. Release the pressure by turning on the dedicated faucet, and wait until water stops flowing.
- Unbox the new membrane, remove the plastic, then take the protection cap off the top.
- Disconnect the red ¼" hose from the drain port on the membrane elbow by pushing down on the white collar while pulling the hose out. Remove and discard the old flow restrictor.
- Remove the old membrane from the system manifold by rotating it to the left, then pull it down to detach. Discard it.
- Line up the connection points and attach the new membrane to the bottom of the manifold. Push it up while turning to the right, and check that it is locked in place and not sitting at an angle. Incorrect placement can damage the o-ring or cause leaks.
- Insert the new flow restrictor into the red ¼" tubing, then push the tubing into the drain port elbow on the membrane. Make sure the tube and elbow are fully inserted.
- Slowly turn the water valve back on. Turn on the faucet and flush the system for 24 hours. Do not drink the flushed water.
- Turn the faucet off and allow 2 hours for pressure to build. Check for leaks during this time.
- Once pressure has built up, your system is ready to use.
Do not use this system with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Specifications
- Model: AQ-RO3-RO
- Brand: Aquasana
- Filter stage: Stage 2, reverse osmosis membrane
- Recommended replacement: every 12 months
- Operating pressure: 275 to 689 kPa (40 to 100 psi)
- Operating temperature: 4.4 to 32.2°C (40 to 90°F), cold water only
- Daily production rate: 50.4 litres (13.32 gallons)
- Recovery rating: 29.43%
- Efficiency rating: 17.91%
Fully Disposable Cartridges
Simply wrap your worn-out cartridges up in old newspaper and place them into your rubbish bin.
Automatic Cartridge Replacement Service
When you invest in a water filtration product from My Water Filter®, we like to ensure you have the best experience possible. We like to lend a hand and take care of you as best we can.
- We happily monitor the cartridge life for you
- When the cartridge is due for renewal, we then contact you
- Once confirmed, we arrange everything and have a new replacement cartridge delivered to your door
The My Water Filter® Difference
"We love our products and what we do so below are just some of the things we do to make a difference"
Transform Lives Through Clean Water Access
At My Water Filter, our steadfast commitment goes beyond our customers and their families; we are dedicated to enhancing lives on a broader scale.
The core of our mission lies in leaving a legacy and making a meaningful difference in the world. With every purchase you make, we contribute 30 days' access to Life Saving Clean Water to those in need, acting as a catalyst for positive change.
We give water on your behalf through our enduring partnership with the Global Giving Initiative, Buy1GIVE1.
Your choice to support My Water Filter translates into tangible assistance for those in need, contributing to the collective effort of saving lives. Thank you for being a crucial part of this journey and for enabling us to make a genuine impact, one purchase at a time.

We Give Together
When you buy a water filter or home water solution from My Water Filter®, at no extra cost to you, we give life changing drinking water to people in need on your behalf.
Bit by bit we make a difference together. Check out our giving page here.
"We also deliver our products for FREE and you get a 30-day money back guarantee. The product comes with free insurance too!"
Free Delivery Australia Wide
Our 10 Guarantees
30 Day Money Back Guarantee
| Product ID | 2889 |

