Water Filter Leak Shut Off & Filter Life Monitor

Your best defense against water damage...

The Leak Stopper & Filter Life Monitor is your best means to prevent water damage and the incovenience associated with it.

When moisture is detected by the metal contacts the alarm is triggered and the unit activates the solenoid valve to shut off the water supply to the appliance. The Leak Warning indicator will continuously blink blue. The alarm will  continue to sound until the unit is manually reset.

After resolving the leak, press and hold the reset button for 4 seconds - the unit will then generate a long “beep” sound and reset the solenoid valve.

ULTRA-SENSITIVE SENSOR
Warns against the first sign of leaking

QUALITY MANUFACTURE
Created by specialists in water control

CARTRIDGE MAINTENANCE
Indicates when to change cartridges

Have peace of mind knowing when to change your water filter cartridges. Depending on the life remaining within your filter cartridge the Cartridge Maintenance Indicator will signal a different coloured light. An alarm will also trigger when time is running short for your cartridges to be replaced.

When the battery power of your unit is low, the water supply will automatically be shut off. The Battery Life Indicator will blink yellow and generate a beep sound every 2 seconds to notify the user. Replacing the battery will release the alert and turn on the water supply.

Step by Step Installation

• Shut Off the Water Supply - Locate the water shut off valve (ministop valve, see Diagram 1) for the cold water feed line.
  Close the cold water shut off valve/ministop valve. Turn on the cold water faucet to ensure that the line is  completely shut off and drained. (If there is no cold water shut off valve located under the sink, then turn off the main water supply at the entry to the residence).

• Install the Solenoid Shut-Off Valve - Unscrew your plumbing assembly (compression tee, see Diagram 1) from the shut off/ministop valve. In it’s place, screw the solenoid valve onto the shut off/ministop valve. The plumbing assembly can then be reattached to the male thread of the solenoid valve (Diagram 1). 

• Install the battery provided into the control unit.
  NOTE: Once the battery is successfully installed the unit will generate a long “beep” sound and all the indicating lights will turn on for approximately 3 seconds. The Cartridge Maintenance indicator will blink several times.

• Place the control unit at the lowest position possible close to your appliance/system. Ensure the metal contacts are face down, touching the area susceptible to water leakage.
  NOTE: If the surface where the unit is to be placed is made of metal - place a piece of paper or cloth between the unit and the surface.
  Your unit is now operational and will begin monitoring leaks and the life of your filter cartridge(s).
  
  

Monitoring Filter Life

On the unit, simply click the ‘CHECK’ button. The light will then display for 3 seconds - it’s colour indicating the life  status of your filter cartridge.

To reset the filter life - hold this button for 4 seconds, the unit will then reset to the original setting of days.

The My Water Filter® Difference

“We love our products and what we do so below are just some of the things we do to make a difference 

We Give Together

When you buy a water filter or home water solution from My Water Filter®, at no extra cost to you, we give life changing drinking water to people in need on your behalf.

Bit by bit we make a difference together. Check out our giving page here.

“We also deliver our products for FREE and you get a 30-day money back guarantee. The product comes with free insurance too!”

Free Delivery Australia Wide
Our 10 Guarantees
90 Day Guarantee
12 Month Warranty