REDESIGNED FOR 2026Most water filtration systems on the market today were never designed to deal with the range of contaminants now being found in modern water supplies. At the same time, traditional salt-based water softeners remain expensive, wasteful, and require constant maintenance.
That’s why we chose a different approach.
The Ultrapure Hard Water Filtration System is engineered using 316 marine-grade stainless steel, offering exceptional durability and corrosion resistance. Unlike many systems built from 304 or lower-grade stainless steel, this system is designed to perform reliably for many years without rusting.
Each filter housing includes precision sealing points above the cartridges, ensuring water cannot bypass the filtration media. This design forces every drop of water through the filters, delivering the level of filtration performance the system was designed to achieve.
To address hard water, the system incorporates advanced Magnet and Limetron anti-scale technology. This innovative approach tackles scale buildup without the need for electricity, salt, chemicals, or ongoing maintenance.
The result is a smarter, simpler solution to managing hard water without the cost and inconvenience of traditional water softeners.
This technology has been extensively tested in some of Australia’s hardest water conditions, including regions from Busselton to Paraburdoo, where mineral-heavy water can cause severe scale problems
The outcome is a filtration system that delivers high performance, long-term reliability, and modern hard water protection.
When performance, durability, and water quality matter, the Ultrapure Hard Water Filtration System stands among the most advanced solutions available in Australia today.
You can see white staining and spots on your shower glass.
Your kettle keeps building up on the inside with white slush and scale.
Build up grows inside the dishwasher.
Coffee machines require harsh chemicals to remove the limescale to allow it to heat.
Plants have issues and just don't look healthy.
You’ll have dry, itchy, tight skin after showering,
Hair feels dry, brittle, or straw-like.
You’re cleaning more often but things never look “sparkling.”
Clothes feel stiff, rough, or scratchy.
Soap & shampoo don’t foam properly.
Scalp irritation or dandruff.
Showerheads clog up or spray unevenly.
If several of these symptoms sound familiar, hard water is likely affecting your home. The good news is that modern filtration and anti-scale technology can dramatically reduce these problems, helping protect your appliances, improve water quality, and make everyday cleaning easier.
Sodium-Rich Water Is Bad for Skin, Hair & Appliances
For people focused on skin health, anti-aging, or hair quality, I bet you can tell this isn’t the greatest ‘Advantage list’
Environmental & Regulatory Pushback
Salt softeners discharge high salt water content into our wastewater systems (down the drain) Some states in America have banned softeners for this reason as it can damage water ways, soil, and makes recycling more difficult.
High Maintenance, Ongoing Costs
Salt systems require:
The Limetron and Magnet are:
Introducing The Future of Water Softening
And it starts right at your water meter.
The super-powerful Ultrapure magnet is attached to your water pipe as close to your front water meter as possible. The magnet immediately starts treating the minerals, ensuring your home water supply pipes stays clear and free-flowing, so you’ve got the most pressure and flow for all of your water needs.
Down the line, where applicable, the Limetron is installed, it further acts upon your water in a catalytic way, not magnetic, this extra form of treatment further conditions the minerals, making it softer, less sticky, and less damaging to you and your home.
Yep. Depending on your experience. The hard water sounds too good to be true. Why would they still sell water softeners if this worked?? Well, we also ask, why are the biggest corporations in the world utilising this technology? Limetron is used by Honda, Kellogg's, Nestle, Coca-Cola and more Magnets are used by mines, manufacturing and massively in agriculture (farming) And now by us.
Please feel free to read our incentive-free reviews And check back soon for customer testimonial videos to be found below
The honest truth is, we made the system because of the PFAS alerts that we’re all over the news.
And as people called in and shared their stories and worries, we didn’t have something exactly for them. Sure, we had filters, of course, being in business since 2012, but we didn’t have test results on paper.
So we went out and made something that we can say, “this is what you need”.
As far as we’re aware, no one else has done this, and that’s what makes Ultrapure so special and why we’re comfortable in saying, that as of February 2026, this is the best system available on the Australian Market.
We’ve gone far and wide to get
the most tested and most certified filters
so we can sleep at night knowing
we’re providing you with a filter
that does what it says it does on the box.
You will find, WaterMark components, which is essential for insurance purposes
And
NSF Components
(globally recognised organisation for public health standards)
So NSF sets recommended standards
and the best filters meet these standards
Learn More About NSF Here:
https://www.nsf.org/
Learn More About WaterMark:
https://watermark.abcb.gov.au/
Learn More About SGS Here:
https://www.sgs.com/en-au/our-company/about-sgs
Independently tested performance of the Disruptor® filter:
| Contaminant | Reduction |
|---|---|
| Free Chlorine | > 99.5% |
| Total Chlorine (Chloramines) | > 99.3% |
| PFOS | > 99.0% |
| PFOA | > 98.9% |
| Lead (Pb) | > 99.4% @pH 6.5 and pH 8.5 |
| E.Coli (Total Coliforms) | > 99.9999% |
| Coliphage (Bacterial Virus) | 99.9995% |
| Copper (Cu) | > 99.9% @pH 6.5 and pH 8.5 |
None of it is going away
And none of it is good for your body
Ultrapure doesn’t just taste amazing
It ensures the contaminants are actually removed
So you live better
And so your water truly is, Ultrapure.
How it Works And Why it Differs from The Rest
This baby takes on the treated water:
After filtration, fresh, crisp water flows at up to 60 litres per minute, ready to use and enjoy.Note: This isn’t just a taste and odour improvement, but true filtration and contamination removal, getting water back to where it is supposed to be -Ultrapure.
As the water flows into your housing and into..
Cartridge one
Sediments, Dirt, Sand, Algae, Rust (lumps and bumps) are sucked up so the next two cartridges can perform at their best.
Your water then flows into filter two, in there is a NSF42 certified carbon block cartridge that starts the chemical removal process.
Now we're set to start to remove PFAS, Chlorine, Chloramine, Herbicides and Pesticides (and smells and tastes)
Lastly, the heavy hitter, the Disruptor.
Electroadsorptive nanotechnology
High-surface-area nanofibers
Precision membrane layers
Premium-grade catalytic activated carbon
Tackle and absorb modern contaminants everyone needs to remove.
|
Pressure Protection Valve |
|
Stops sudden water pressure spikes
Protecting filters and appliances
|
|
|
Stainless Steel Ports - Inlets and Outlets |
|
Super strong versus plastic ports
And they don’t leech lead like brass ones can
|
|
|
Heavy Duty Housings |
|
Thicker than industry standard prevents splits,
leaks and headaches
|
|
|
Super Seal End Caps on Cartridges |
|
Ensures 100% Filtration versus industry standard cartridges
that can allow water to pass around filters
|
|
|
Stainless Steel Pressure Gauges |
|
Corrosion resistance for long service life
|
316 Stainless is The Best Sunscreen for a filter that money can buy
The Australian sun isn’t a joke and the Ultrapure is built taking that in account.
The highest grade 316 stainless steel means it’s the most corrosion-resistant on the market and also boasts superior chemical resistance compared to 304 stainless steel.
The cover takes care of the plastics on the inside, keeping them cool and lasting longer.
Inside, there are:
1x Triple-stage 20" x 4.5" heavy-duty filter housing
1x 316 Marine Grade Stainless Steel bracket & cover
1x Carbon block & sediment cartridges (Stage 1 & 2)
1x Premium Disruptor® Cartridge (Stage 3)
1x Pressure Protection Valve
1x Filter Wrench
1x Installation Guide
You have a system that reliably integrates into your home without a hiccup.
You won’t know its there besides having fantastic water.
Sure, you’ll get used to it, as we all do, but we know, it only takes one trip away for a drink or a shower without a filter, and we all realise how lucky we are and how much we love our filters.
And an passionate team member will be right back with you. So you don't waste your time and effort and waste money on the wrong filter.
Sure, your water will taste good, and thus you’ll drink more of it, therefore be more hydrated, which benefits, physical performance, energy and brain function, plus it can also help with the Aussie hangover. But it goes much further than that.
As a long term investment, PFAS is also removed, and when they say we consume a credit card of plastic per week, you and I both know it's going to be A LOT less.
And with PFOA (a PFAS chemical) being classified as a group 1 carcinogen, the Ultrapure system, also contributes to Ultrapure health.
Brian Johnson Leading Health Influencer states,
“Water is a really big source of contaminants, things like heavy metals, PFAS and microplastics”
Brighter Smoother Skin
Less Inflammation
Stronger Softer Hair
Better Detoxing
Chlorine weakens hair protein (keratin) thus, a shower with no chlorine leads to stronger hair. It’ll also look thicker and vastly improves dandruff and hair shedding.
Chlorine and Chemicals also strip the natural oils your body produces to protect itself. When we remove these chemicals, your skin is softer, is less tight, and has a better tone and glow.
We’re not saying bottled water is evil, because it's essential in a bind. But most bottles are used once, not recycled, and end up in landfills or oceans.
Bottled water also carries the environmental cost of mass production, packaging, and transportation.
When you combine these factors with the benefit of having healthier water available at home every day, the long-term advantages are hard to ignore.
So, cheers to the planet.
Here's the deal. Regardless of what filters are put in a whole house system there are limitations of what we can remove, it’s not our filters, but limitations as per technology, water pressure and water flow. So if you want to know, here’s what you need to know.
A common Australian shower uses around 10 litres per minute, so one common bucket of water per minute. Thus two showers and a dishwasher needs 25 litres per minute to operate, but also needs the water pressure to be able to supply the 25 liters per minute and more as extra sources of water are being used, washing machines etc.
So a whole-house filter is limited, because it needs to flow fast, not block too much pressure, and also last a long time, so you’re not changing filters every six months. So at this fast flow rate we are not able to remove some nasty contaminants. Thus, we’re forced to move under the sink, where we don’t need so much water flow as it's just for drinking.
The difference is, this RO system makes water at like 200mls per minute. So now we can slow the water flow right down and filter the water at a very low micron level like 0.0005 micron.
Thus the technology of filters under the sink, allows for different technologies that removes the finer contaminants making Ultrapure - bottled quality water for you at home.
Take a look at the twin, Toxic Contaminant Removal Reverse Osmosis water filtration system. The TCR RO is purposely made to work in with this ULTRAPURE whole home water filtration system. Pure drinking water is the ultimate way to live.
Filter replacement frequency depends on your water quality and usage. Typically, filters need replacement every 12 - 18 months.
Quality 20” x 4.5” whole house systems are designed to maintain adequate water pressure throughout your home. When properly sized and installed, pressure drop is unnoticable. 10” and 15” water filter systems can have issues. Regular filter maintenance ensures optimal flow rates. If you have low existing pressure, we can recommend systems with minimal pressure loss.
Installation costs vary based on your plumbing configuration and system complexity. Professional installation with the ball valves & water pipe included typically ranges from AUD $800 to $1000.
No, whole house water filters are connected into the main water line. This task must be performed by a licensed plumber.
Standard whole-house filters do not remove hardness minerals such as calcium and magnesium. To treat hard water, you’ll need a water softener or a salt-free conditioner in addition to your filtration system. We offer integrated combination systems that address both filtration and hardness in one complete solution.
