Cartridge Replacement and Flushing Guide for Fluoride Removal Ultrapure Water Filter Systems [VIDEO]

It’s incredibly easy to replace the cartridge in your Ultrapure Fluoride Removal filter.

To get the best results out of your fluoride removal cartridge, there are certain steps you need to follow.

When you replace the fluoride removal cartridge in your Ultrapure Water Filter, it must be flushed for 10 minutes, without any cartridges after it before being used.

How To Replace And Flush The Fluoride Removal Cartridge In Your Ultrapure Water Filter

      1. Remove the old cartridges and insert your new cartridges, except those that come after the fluoride cartridge.
      2. With all the housings tightened up, turn the water on and let it flush for 10 minutes
      3. Open the housings, and insert your new cartridges.
      4. Turn the water on, and flush for a further 5 minutes.

Congratulations, that is how you replace the cartridges and flush your Ultrapure Fluoride Removal filter!

Be aware that if you've got a Benchtop Water Filter when it says this way up on the cartridge, this way up goes down into the head cap.

Click here to see our cartridge replacement pack for the twin and triple systems.

If you have any questions or if we can help you with anything, please contact us or jump onto our live chat at the bottom of this page.

Featured products

FILTEROO 12L Gravity Fed Stoneware Water Filter with Ceramic-Carbon Cartridge with watermark
FILTEROO 12L Gravity Fed Stoneware Water Filter with Ceramic-Carbon Cartridge
$299.99
Aroma Sense Q Vitamin C Shower Filter Shower Head with Hose and Bracket
Aroma Sense Q Vitamin C Shower Filter Shower Head with Hose and Bracket
$139.99
ULTRAPURE Aragon 10" Twin Under Sink Water Filter System with Fluoride Removal with watermark
ULTRAPURE Aragon 10" Twin Under Sink Water Filter System with Fluoride Removal
$384.99